This site uses cookies. By continuing to browse the site, you are agreeing to our privacy policy.     





ATEX

DESCRIPTION
ATEX electric actuator, aluminium housing with manual override by external shaft or hand wheel for torques of 25 to 1000Nm and in accordance with CE-ROHS-REACH directives.

VERSIONS
TECHNICAL DATA
  • VRX, VSX: multivoltage actuator
  • 100V to 240V 50/60Hz (100V to 350V DC)
    25V to 30V 50/60Hz (12V to 48V DC)
    3-phase 400V 50/60Hz
  • VTX: 230V 50/60Hz and 3-phase 400V 50Hz
  • 3 modulating points control or on-off (400V and VTX: 3 modulating points control only)
  • Duty rating S4 50% (CEI34)
  • Working temperature:
  • VRX/VSX multivolt: -20 °C to +70 °C
    VRX/VSX 3-phase 400 V: -20 °C to +54 °C
    Battery models (GS6,GPS,GFS): -10 °C to +40 °C
    VTX: -20 °C to +63 °C
  • Enclosure IP68 5 m / 72 h
  • 4 adjustable limit switches 5A
  • connection according ISO5211:
  • VRX: F05/F07 star drive 17 mm
    VSX: F07/F10 star drive 22 mm
    VTX: F10/F12 star drive 36 mm
  • Manual override
  • Torque limiter monitored by software (except 400V) or mecanical (VTX)
  • Failure report relay (except 400V)
  • RS485 connection (except 400V and VTX)
  • Mechanical limit stops (adjustable for VSX and VTX)
  • Visual position indicator
  • Regulated anticondensation heater
  • Weight: 4.4 kg (VRX) • 6.4 Kg (VSX) • 25 kg (VTX)




 



 









VRX & VSX
user manual

VRX and VSX user manual

VTX
user manual

VTX user manual

Standards
ATEX actuators standards

Catalogue
Valpes actuators catalogue

2D & 3D files
Download actuators 2D and 3D files

Support
Valpes actuators support section


VRX

VSX

VTX
               
  Code ATEX marking N° LCIE N° IECeX
LCIE
N° UKCA
  Zone Gas Dusts
  VRX/VSX II 2 G D Ex db IIB T6 Gb Ex tb IIIC T80°C Db 06 ATEX 6006X 21.0015X ITS21UK
EX0157X
  VRX/VSX 400 V II 2 G D Ex db IIB T5 Gb Ex tb IIIC T95°C Db 06 ATEX 6006X
  VTX II 2 G D Ex db IIB T5 Gb Ex tb IIIC T90°C Db 15 ATEX 3012X 15.0074X -
               

The 2014/34/UE European directive specifies the conditions for the devices to be installed in explosives atmosphere. Our explosion-proof actuators comply with ATEX and CEM directives (all certificates are available on this website).
             
  VRX • VSX VTX    
Denomination Covered areas Covered areas    
Installation places II   II   Approved equipment for surface industries
Protection level 2 2 &3 2 2 &3 Installation into chemical, petrochemical, agriculture, food industry…
Zones d'implantation pour les gaz, vapeurs, liquides G Zone 1
Zone 2
G Zone 1
Zone 2
Zone 1: presence of explosive substances (gas) between 10 and 1000 hours/year
Zone 2: presence of explosive substances (gas) less than 10 hours/year
Zones d’implantation pour les gaz D Zone 21
Zone 22
D Zone 21
Zone 22
Zone 21: presence of explosive substances (dusts) between 10 and 1000 hours/year
Zone 22: presence of explosive substances (dusts) less than 10 hours/year
 
IEC marking Ex   Ex   GAS
Type of protection (gas) db   db   Flameproof enclosure protection
Gases in the atmosphere IIB IIB & IIA & I IIB IIB & IIA & I ethylene, propane, methane
Maximum surface temperature (gas) T6 T6 (85°C)
T5 (100°C)
T4 (135°C)
T3 (200°C)
T2 (300°C)
T1 (450°C)
T5 T5 (100°C)
T4 (135°C)
T3 (200°C)
T2 (300°C)
T1 (450°C)
Maximum authorized temperature of the housing for equipment installation (gas)
Equipment Protection Levels Gb Zone 1
Zone 2
Gb Zone 1
Zone 2
Possible installation in zones 1 & 2
 
IEC marking Ex   Ex   DUSTS
Type of protection (dusts) tb   tb   Flameproof enclosure protection
Dusts in the atmosphere IIIC IIIC
IIIB
IIIA
IIIC IIIC
IIIB
IIIA
IIIC: conductive dusts
IIIB: non conductive dusts
IIIA: flammable fiber lints
Température maximale de surface (poussières) T80°C T90°C Maximum authorized temperature of the housing for equipment installation (dusts)
Equipment Protection Levels Db Zone 21
Zone 22
Db Zone 21
Zone 22
Possible installation in zones 21 & 22


Multivolt VRX and VSX models  
Code Star drive nut
Connection
Torque Voltage supplies Power Operating time (90°)  
VRX25.70A.G00 17 F05/F07 25Nm 100V to 240V 50/60Hz (100V to 350V DC) 45W 7s
VRX25.70B.G00 17 F05/F07 25Nm 15V to 30V 50/60Hz (12V to 48V DC) 45W 7s
VRX45.70A.G00 17 F05/F07 45Nm 100V to 240V 50/60Hz (100V to 350V DC) 45W 15s
VRX45.70B.G00 17 F05/F07 45Nm 15V to 30V 50/60Hz (12V to 48V DC) 45W 15s
VRX75.70A.G00 17 F05/F07 75Nm 100V to 240V 50/60Hz (100V to 350V DC) 45W 20s
VRX75.70B.G00 17 F05/F07 75Nm 15V to 30V 50/60Hz (12V to 48V DC) 45W 20s
VSX100.90A.G00 22 F07/F10 100Nm 100V to 240V 50/60Hz (100V to 350V DC) 45W 15s
VSX100.90B.G00 22 F07/F10 100Nm 15V to 30V 50/60Hz (12V to 48V DC) 45W 15s
VSX150.90A.G00 22 F07/F10 150Nm 100V to 240V 50/60Hz (100V to 350V DC) 45W 30s
VSX150.90B.G00 22 F07/F10 150Nm 15V to 30V 50/60Hz (12V to 48V DC) 45W 30s
VSX300.90A.G00 22 F07/F10 300Nm 100V to 240V 50/60Hz (100V to 350V DC) 45W 60s
VSX300.90B.G00 22 F07/F10 300Nm 15V to 30V 50/60Hz (12V to 48V DC) 45W 60s
3-phase 400V VRX et VSX models    
VRX25.709.R00 17 F05/F07 25Nm 400V triphasé 50/60Hz 52W 10s
VRX45.709.R00 17 F05/F07 45Nm 400V triphasé 50/60Hz 52W 10s
VRX75.709.R00 17 F05/F07 75Nm 400V triphasé 50/60Hz 52W 15s
VSX100.909.R00 22 F07/F10 100Nm 400V triphasé 50/60Hz 135W 10s
VSX150.909.R00 22 F07/F10 150Nm 400V triphasé 50/60Hz 135W 20s
VSX300.909.R00 22 F07/F10 300Nm 400V triphasé 50/60Hz 135W 35s
230V and 3-phase 400V VTX models    
VTX600.A08.G00 36 F10/F12 600Nm 230V AC 50/60Hz 250W 38s
VTX600.A09.R00 36 F10/F12 600Nm 400V triphasé 50Hz 250W 38s
VTX1000.A08.G00 36 F10/F12 1000Nm 230V AC 50/60Hz 250W 38s
VTX1000.A09.R00 36 F10/F12 1000Nm 400V triphasé 50Hz 250W 38s
Options
EPR...B 1) 100 / 1000 / 5000 / 10000 Ohms feedback potentiometer
EPT.C 2) 0-20mA / 4-20mA / 0-10V transmitter
EFC.2 Card with 2 Extra limit switches
IP10 3) 10 meters 72 hours IP68 tightness (VSX only)
MARINE High durability marine coating
HUMPRO Mainboard conformal coating  
P8 AXMART® Bluetooth® 4-20mA or 0-10V positioning board, compatible with Modbus-RTU  
1) Specify the model
2) Only for a travel time higher or equal to 10s
3) Delivered without cable gland
 





For pneumatic actuators and automation, please go to our sister company www.bar-gmbh.com

Site map

Products
Valpes electric actuators
Options
Electric connection

Valpes
The company
News
Sales team
Contact us
Location

Download
Brochures
User manuals
Standards
Files 2D/3D
Catalogue and pricelist
High resolution photos

Support
Frequently asked questions
Video tutorials

Valpes
Z.I. Centr'alp • 89 rue des étangs
38430 Moirans • France
Tél. +33 (0) 4 76 35 06 06 • Fax +33 (0) 4 76 35 14 34
valpes-info@wattswater.com • valpes-adv@wattswater.com (for orders)

Private acces request        |        careers        |        General sales conditions        |        Website using conditions        |        Privacy policy